Questions & Answers for: Pyle acc switch Computers & Internet

...acc. position the screen still reads "video disabled while driving for safety purposes". Does anyone know why this might be happening? Thanks in advance, Joe The problem is most likely in the wiring ...

...the problem when the deck reconizes power but not to power it. also make sure you have the key on acc. becasue this is one way to connect the 12v

a2070 crackes when i move input switch, so a2070 crackes when i move input switch, so changed to different output, ok for a while then this crackes and fades, tried all outputs now all crackling ...

Pyle PLMRA 400watt marine amp. Why would my even channels on the amp not work. I have switched cables to include using known good ones. I'm assuming you mean channels 2 and 4? If you tried new cables ...

Brake light problem I have a 2004 Ford Ranger. The tail lights and turn signals are working. No brake lights. Fuses and bulbs are fine. had brake switch checked and it's ok. you have no voltage going ...

where do I set switch for pyle pvc2 volume control There is a switch on the volume control with different settings. I am connecting to the pyle speakers that came as a set to a Yamaha rx v2400. I had ...

I have no brake lights on my 1950 mercury I,ve replaced the brake switch at the master cyl. but still no lights I,ve even tried bybassing the switch still no luck if theirs a fuse I can,t find it I,ve

...is the display always on? I have a Pyle PLD175TBT and when I turn the key off, the display shows "ACC WAIT" and then "ACC OFF", and then it stays on. Do I have something wired wrong? It's not ...

brake light switch we put a switch and the brake lights are not working 92 Toyota corolla the brake light switch we put a new brake switch and the brake lights still don't work can you help me out. ...

I am wiring a Pyle PLMRKT36WT. There are two power source wires. ACC and POWER B+. What is the difference between them and how should they be wired/switched. didnt specify vehicle --acc is an ...