Questions & Answers for: DISH Network w 129 Computers & Internet

...This screen will give you signal readings for all satellites orbitals you have such as 119,110,129, 148 ,61.5, etc. on the 14,15,16, and 21 transponders. These value differ depending on which ...

...on transponder 21, reciever changes to transponder 4 and there is nothing!!! this is on satellite 129 only, 110 and 119 work fine Donna, I am sorry to hear of your troubles. I am assuming you have ...

...summary screen, it should show the 3 sat or 4 depends on how many you have, ex, 119, 110, 129, or 77, 72, 61.5, once all sat are all ok, selct done, then select done on the point dish and ...

...with port1 up to 2 or 3 depends on your sat orbital location, all the trans on the sat 119, 110 or 129 if you have should be ok and green. once you see that all ok, select done on the screen, and it ...

...once its done, it should show the whole installation summary, port1-119-ok, port2-110-ok, port3-129 or 61.5, once you see it, select done and it will go to the point dish, select done and cancel ...

can't find sat 129. Had to move dish to replace roof. If you area aligning your dish yourself go to point dish screen ( menu 6-1-1) then highlight satellite and choose 129, use the signal meter and ...

...second delay. have tried rebooting the receiver no luck. signal strength is 26 or 27 on 110 and 129 is 44. have talked to tech support 20 times. they just want us to get a house visit for $95.00 ...

...choose save or cancel. My numbers are dish system 500, tuner input 01, transponder 04, satellite 129. Signal strength 0. I have a Dish DVR, VIP 722. It sounds like the dish may be mis-pointed

...not receive most HD (which comes on Eastern Arc satelllites not on that antenna, or on satellite 129, not on that antenna) and depending on your DMA you may not get locals, but most cable channels ...