Questions & Answers for: Sharp 100uf Computers & Internet

regulators on the secondary side of the low voltage supply. look for high voltage cap like 200-250v 100uf that could be bad around flyback. Also look to see if reg. shorted, and horz. output bad

horizontal retrace lines at top of screen Change 100uf 50-63volts capacitor next to the vertical output ic,if not solved check the vertical b+ filter on the 24volt line.If nothing else work try ...

...When the XG-E1200U shows the standby light but does not power on, it usually means several of the 100uf 16 Volt surface mount capacitors have dried up on the main board. Recommend replacing all of ...

light comes on, when I turn the switch on nothing happens. Richard Part had this answer replace the 100uf caps so are these caps you talk about replacing 100uf 16 volt on the power supply board or the