Which ones? System speed is programmed from station 10 or 11 and goes in the 6xx's, depending on your version of software. The start is FEATURE 00 FEAT 6xx and dial the number You can continue programming more numbers by pressing FEAT 6xx or Feat 00 to exit.
Personal speed dial numbers are programmed similarly, except they are in locations 80-99 on each phone and can be programmed from the phone if it's a system phone.
Auto Dial buttons use blank buttons on your set. Feature 00 pressing the button and dialing the outside number store those. Again, Feature another button will let you program another button, or Feature 00 ends programming.
Carl
Hi, This is how to setup your speed dial: Press "Menu" to open
the menu on the display screen. Press the "Program"
key on the screen. A message will appear on the display telling you to press
the speed dial key to program. The speaker light will turn on. Press the key on the
display that will be programmed. Click "Next" if necessary to locate the key on
the display. Press the "AD" key on
the display. A message will ask the user to "Change Number Yes=1 No=2." Press
"1" to answer "Yes." A message will appear telling you to enter the number
to be programmed for the key. Enter the phone
number, then press the "#" key. A message will appear that the number has been
saved. A message will ask the user to "Change Label?" Press "1" to
answer "Yes." Type the label using
the display keys, then press the "#" key to save. A confirmation will appear
that the label has been saved and a confirmation tone will sound. Press "Menu" then
press "Program." Press "Exit" to close the speed dials setup. Regards
.System programming is done on M7310,M7324 and T7316 set only. by pressing the feature key followed by **266344.When prompted to enter the password enter 266344. . 
To manually create a speed dial entry
1
In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings.
2
Click New Entry.
3
In the Speed Dial Settings - New Entry dialog box, type a name and fax number, and then click OK.
4
In the Speed Dial Settings dialog box, click Save.
The entry is stored on the HP device. To create a speed dial entry from the Address Book
1
In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings.
2
Under Address Book, click Select From.
3
In the Address Book dialog box, select one or more names, and then click OK.
4
In the Speed Dial Settings dialog box, click Save.
The entry is stored on the HP device. 523 views
Usually answered in minutes!
×