The H700 is a little picky when pairing.
Make sure the H700 is fully charged.
1. Leave the H700 Microphone closed and hold down the button until it turns purple.
2. Once the light is purple, open the microphone. (If it turns blue then start over. This is normal operation mode not pairing.)
3. Go into iPhone Settings>General>Bluetooth and turn Bluetooth on
4. H700 should appear on the screen. Select it.
5. If the device asks for the Device PIN, enter: "0000"
6. The two are now paired.
The H700 may leave pairing mode during the process. This is the pickiness I mentioned. If it does then just restart the process. It may take several tries or it may work on the first shot. Just be patient.
103 views
Usually answered in minutes!
×