Please connect the router directly to the computer with a network cable and switch on the router.
It will couple of minutes and your computer should have got a IP address from the router.
Go to command prompt :
1. Click on Start / Pearl / windows Orb
2. Click on Run (windows XP) / Search box (Vista / Windows 7)
3. Type Cmd and hit the enter key.
4. You will be in a black screen (command prompt)
Find the IP address of the router : Type the following
Ipconfig (and hit enter)
you will see the a number in this format - 192.168. X.X next to Default gateway.
Write down that number
Access Router page:
1. Open a browser window - Internet explorer / Mozilla
2. In the address bar type the default gateway address you noted down
3. Click on the Go button / just hit enter.
4. You should get a username & password request screen
Default ones are usually (unless any one has changed it or set differently by the manufacturer - refer the manual also)
Username: Admin or Administrator
Password: password / admin
In this screen you should be able to click on Wireless setting and there you can see your WEP key or you can change it to the one you wanted
Please click on the link below and choose the hardware version available in the sticker located at the bottom of the router. You can download the manual at this location and follow the steps. In case you need assistance please reply to this post
87 views
Usually answered in minutes!
×