Removing event from programming is dependent on brand and model number of timer.
Identify timer and then add a comment.
Some timers are reset by unplugging them. Some timers have a reset button.
Each timer is different.
On Utilitec 0192773, the manual says to press PROG button to find setting, and then press RESUME button.
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html
On ST01C timer, press MODE until screen displays PGM, then press ON/OFF to find setting, then press + until program displays, press ON/OFF and then press + until SKIP is displayed.
http://waterheatertimer.org/ST01C-program.html
Use following links to help identify your timer:
http://waterheatertimer.org/GE-timers-and-manuals.html
http://waterheatertimer.org/Woods-timers-and-manuals.html
http://waterheatertimer.org/UPM-timers-and-manuals.html
If you do not want to identify your timer and add a comment for further free help, then take advantage of fixya phone support.
For a price, fixya expert reads steps from the manual while you program the timer.
116 views
Usually answered in minutes!
×