What is error code 2 on a canon MP210? - Canon PIXMA MP210 Photo All-In-One Printer

SOURCE: E22 error on Pixma MP210

I had this problem as well. After turning on, there'd eventually be a whirring noise followed up by a "CLUNK" noise, and then I'd get the e22 message. Took it down to a local printer place and the guy had a quick look.

- If you open up the printer so that the ink moves to the left, you should see the white plastic cleaning bed all the way to the right. The guy showed me how this thing can be snapped into an up and down position. Mine was stuck in an up position, therefore after the guy pushed it down everything was hunky dory.

Apparently it was cos the printer needs to do a cleaning cycle before it does anything else, so with the cleaning bed in the stuck position it couldn't do it. Hope this helps.

Clive

• 4362 Answers
• Posted on Feb 13, 2010

SOURCE: For Canon mp210. Error light blinks. Either E22 or E2

Hi there
This is a Carriage error take a good look at the carriage that the inks are in and see if they are sitting ok and also do the next incise there some thing there stopping it from moving.


Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

SOURCE: error code 6000 on canon pixma mp210 stops me from printing

Hi,
Error 6000 means - The specified file could not be encrypted.
Solution: reinstall the printer driver.... it's better to install a upgraded version of driver...
Good Luck!!!

SOURCE: canon mp210 error 5

Power down the printer completely. Unplug from wall.
Re-insert all cartridges. Then power up It takes a while for the test page to print. After that you should be good to go

JDTec

• 4338 Answers
• Posted on Jan 05, 2011

SOURCE: My canon mp210 printer doesn't

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on
3. hold the Power button, release Resume Button.
4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.
5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...