I have a Bosch Dishwasher, Model SHU5312UC/U12. We have been having problems with the wash cycle. Specifically, when we turn in on with will start at 2 hour cycle, when the timer gets to 1 minute, it the wash continues until you stop it manually, or cancel the cycle by pushing the Cancel/Drain buttons. From what I have read online, they recommend replacing the Control Module. I ordered one and am about to replace the old one. I've taken off the door screws and the front door came off very easily. But the top portion of the door that hides the control module will not come off. Is there a trick to doing this? Please help. Thanks, Sergio
Sergio,
Did you get your problem resolved. By now I think you have found the two screws on the sides of the inter part of the door. Did replacing the module fix your problem. I have the same problem.
Mike
657 views
Usually answered in minutes!
Mike,
Yes I did find the two screws on the sides. Once I removed the screws, the top portion of the door came right out. I did replace the module and the dishwasher is working great now. Thanks for responding Mike.
Sergio
I realize I need to replace the control module. How many screws do I need to remove on the door to access the control module? I am worried I may open the wrong screw and make the problem worse.
My Bosch shu568suc/u12 id running strange. won't stop
I can fool it by setting the delay start.
I am sure it is the control module but I cannot get the front pane off.
I took out the screws but the top will not budge
Please let me know the trick
thanks
I have the same issue right now. Can anyone have a part number for the control module being referenced? Starts at 2h and runs continually while 1 is in the display and does not finish.
Thanks
Kevin
×