To turn on the subwoofers you first need to be using the subwoofer pre-outs. Go into the Tuner and move the right Control Knob directionally down (without pressing in) and hold it there for a couple seconds.
Also make sure that the unit is not in Dual Zone. To check this setting:
• Press and hold the left AUD knob.
• Turn the AUD knob to "2 Zone". Tap the AUD knob in like a button to select.
• Turn the knob to "Off".
• Press and hold the AUD knob to exit.
To turn on the subwoofers you first need to be using the subwoofer pre-outs. Go into the Tuner and move the right Control Knob directionally down (without pressing in) and hold it there for a couple seconds.
Also make sure that the unit is not in Dual Zone. To check this setting:
• Press and hold the left AUD knob.
• Turn the AUD knob to "2 Zone". Tap the AUD knob in like a button to select.
• Turn the knob to "Off".
• Press and hold the AUD knob to exit.
×
In standby hold menu down and scroll to rear and change it to sub
344 views
Usually answered in minutes!
I Have De Same probleme but i dont find it in the menu i cant chande rear to sib and it's a big trouble becance my amp. clip and my speaker too it's a very bad and i try a lot of solution but everything dos'nt work
P.s Sorry if my english is not very good i'm a french :
×