Supports Bluetooth 1.1, 1.2 & 2.0 + EDR (Extended Data Rate) standards with transfer rates up to 3.0Mbps.
All Acer units that are Bluetooth capable have a Bluetooth on/off button. If you press it and see a message "No Device", it means your unit has no Bluetooth module installed.
Note: some units are already pre-wired for Bluetooth from the factory, but most will need a Bluetooth cable (that connects the Bluetooth module to the motherboard). You may also need a retainer bracket, screws and / or double sided tape to complete the installation. A Bluetooth upgrade kit contains a Bluetooth module, cable and bracket (if needed).
Antenna is integrated into the module, so no external antenna is required.
Have u install the driver (software) for it?. if yes then look at the taskbar where u see bluetooth icon then right click on it then click on configure or anything setup a wizard will come up for instruction.thats all.
NB u can as well do this from the control panel
thank u
180 views
Usually answered in minutes!
×