Howdy, I don't have pictures, but that model is loaded from the bottom (not the back,as one might expect) while the plunger is pulled to the rear then pushed back in once the staples are laid in the track on the bottom. Handy once you get used to it:)
Regards, Farmerbear
SOURCE: I have a PowerFast staple gun #31600. Can not
I got some staples stuck in my Powerfast 31600 too. I THOUGHT they were the right staples, I was wrong. You have to bend a little tab on the bottom of the stapler to let the slide come out of the back. Then you can remove the staples. Replace the slide and tap the tab back into place with a punch.
4,020 views
Usually answered in minutes!
×