Hi,
Check for the following if you get "E01" error message
1. Check for the vent hose whether it is clean which is less than two feet (to outside).
2. Check for the temperature sensor probes one in back at heating element and one in front by the lint filter for the temperature rises resistance increases on both of them and vice verse.
3. Check whether the unit has been grounded.
4. Check for the element that turns off and on during drying process.
5. When first starting and dryer is cool it will dry one load of clothes, it also seems to work for at least the first part of the cycle, until clothes began to get dry then it over heats. display shows E01 and will not run until it has set for about an hour.
Thank you!
380 views
Usually answered in minutes!
×