Connect your two computers to netgear swtich with Ethenret lan cable into LAN port.
Then set ip address in both computer in network adapter property same subnet mask and gateway ip is different .
Means if you give ip 192.168.1.10 to 1 computer you can give ip 192.168.1.11 to another computer.
Then both computer are in network.
Then if your printer is network printer then you can connect your printer with lan cable to switch then set ip ion printer same way.
But if you haven;t network printer then you can connect printer into 1 computer then share your printer in contol panel->printer and faxes if you use windows then right click on printer icn then click on share so you can use it in network.
Let me know if you need further assistance.
Thanks for using FixYa.
326 views
Usually answered in minutes!
×