Code to program my universal control rca - RCA 4-in-1 Universal Remote Control

SOURCE: program the RCA#rcr312 universal remote control

hold the code search buttton until light comes on then select the device you are programing and enter code

SOURCE: programing codes

Here is the link I just found the manual on for this remote control, which I needed the codes for myself: http://safemanuals.com/brand-user-guide-instructions-owner-manual/RCA go there type in the remote model RCR450 enter, click on the link that comes up and download the Manual in PDF form.

The codes for Sanyo are 1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180 depending on which model you have.

OR:

1: Turn on the device you want to program ex: the TV

2:hold the button for the device you need to program in ex:TV
while holding down TV button hold down ON/OFF at the same time for 3 secs and the light should turn on and stay on.

3:click the ON/OFF button until the TV finally turns off may take many times but as long as the light stays on when your not pushing a button you still have codes to go through.

4:press the stop button and the device is programmed into the remote.

SOURCE: lost my manuel "codes" to my rca universal remote control crk74ba3

This website should help.
http://www.thompsontv.com/rcarc.html

SOURCE: tv codes

i have a super scran tv, lost code for my tv


thanks for some help

SOURCE: RCA XL100 Remote Code?

I found a remote on the web for that model and purchased it.