At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi,
Press and hold 4 buttons on the four corners at the same time for 3 seconds to reset the watch after battrey replacement. check the last page of the manual for the same.
Hi,
Mine has done the same. i was looking at this site for the same repair, but i thought it should be quite easy to do ourselves. Simply use a high strength loctite and clamp it in position tightly for a few hours.
I'll let you know how it goes. (It's a bad design - a weak press fit). If the loctite fails then i'll try a metal bonding adhesive.
Gluing objects together can be difficult as the area of contact needs to be large and the applied forces must be such that they do not tend to peel the surfaced off each other.
Try an impact adhesive (a suitable cleaner is available).
Okay, mine's a Chisel but I'm pretty sure the module is similar, if not the same, across the Mettle range.
Anyway, press and hold the light button - marked adjust - until the display says "hold to adjust"; after a couple of seconds the time display will return and the hours will be flashing.
To adjust up, press "start/+" and down press "stop/-". To cycle through the options, press "mode".
Once you're done, press the "adjust" button again to return to regular timekeeping mode.
×