I need a PrinterDriver for Canon S9000 for (Mac OS X)

you want to download driver of canon printer??
Follow this link to download driver:-http://findfreemedia.com/search.html?type=all&search=canon+ip2770+driver&wm=149&sub=10

or
http://filedir.com/drivers/printer/canon-pixma-ip2770-ip2772-338528.html

You can locate the drive here: http://usa.canon.com/cusa/support/consumer/printers_multifunction/s_series/s9000#DriversAndSoftware
And yes, the drive should be all you require for installation.

There are 3 choices, but only 2 that are relevant to what you're looking for.
http://software.canon-europe.com/products/0010421.asp
More than likely, the first download is what you'll need to get and install. If that doesn't work, then the third one might help.

Firstly you'll want to check the company's website for any downloads : http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=2610&modelid=13368#DownloadDetailAct
Go there and select your OS (Operating System) and download whatever you need under the Software category. Probably My Printer & Easy-WebPrint.
Best of luck, hope this helps :)

Have a look at the canon usa site:http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=17160#DownloadDetailActThis link should take you to the canon support page, let it load and it will come up with the driver download center.In the area titles "Driver/Software Selection"Use the drop down menu and select "Mac OS x"This will bring up a list of current drivers for the Mac.The most recent one for the your printer is:MP480 series Printer Driver Ver. 10.6.0.0 (Mac OS X CUPS)If there is also a problem with your scanner then you will also need:MP480 series Scanner Driver Ver. 14.8.1 (Mac OS X)Just make sure you look carefully before clicking the driver as there are also spanish versions on the list..I hope these help.Mike

GO ON LINE AND TYPE THE FOLLOWING INFORMATION THE SAME WAY I WRITE IT IN THE ADDRESS BAR:

CANON S9000 PRINTS BANDS GREEN/MAJENTA/GREEN
ENTER

ROD

After installing the software for Windows XP, download the Canon Inkjet printer add-on module from http://software.canon-europe.com/software/0025531.asp?model=

The link is in the middle of the page under "Downloads"

Mac OS X v10.5 Compatibility For Mac OS X v10.5 compatibility, see below:
<Supported models>
BJC-2100, BJC-8200, BJC-85, DS700, DS810, i250, i320, i350, i450, i455, i470D, i475D, i550, i560, i70, i80, i850, i860, i900D, i9100, i950, i960, i9900, iP1500, iP1600, iP1700, iP1800, iP2000, iP2600, iP3000, iP3300, iP3500, iP4000, iP4000R, iP4200, iP4300, iP4500, iP5000, iP5200, iP5200R, iP6000D, iP6210D, iP6220D, iP6310D, iP6600D, iP6700D, iP8500, iP90, iP90v, mini260, mini320, Pro9000, Pro9500, S200, S300, S330, S400, S450, S500, S520, S530D, S600, S630, S750, S800, S820, S820D, S830D, S900, S9000

<Supported software>
- Printer driver
- Memory Card Utility
- Network Tool
- Setup Utility
- Easy-PhotoPrint
- Easy-PhotoPrint Pro
- Color Management Tool Pro
- Easy-PhotoPrint EX

<Usage>
To use with Mac OS X v10.5, download the latest version of the software from the Canon Web site.
For Easy-PhotoPrint and Easy-PhotoPrint Pro, use the counter-measured version available for download.
The following models, the printer driver is included in the OS.
BJC-2100, BJC-8200, BJC-85, DS700, DS810, i250, i320, i350, i450, i455, i470D, i475D, i550, i560, i70, i80, i850, i860, i900D, i9100, i950, i960, i9900, iP1500, iP1600, iP1700, iP1800, iP2000, iP3000, iP3300, iP4000, iP4000R, iP4200, iP4300, iP5000, iP5200, iP5200R, iP6000D, iP6210D, iP6220D, iP6310D, iP6600D, iP6700D, iP8500, iP90, iP90v, mini260, Pro9000, Pro9500, S200, S300, S330, S400, S450, S500, S520, S530D, S600, S630, S750, S800, S820, S820D, S830D, S900, S9000

Hi Try this.

Canon S9000
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button twice then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should then respond as normal.

Good Luck!

Tinteiros (Ebay)