Error code 1-2010 I cannot scan. Something to do with JIT Debugging not enabled.

If you'd like to resolve this isue just download and run the Kodak Clear Utility from www.kodak.com/go/clear.

Once done, download and install the lastest Kodak Home Centre Software from www.kodak.com/go/drivers. This should sort it out for you

Hello Sir, As you have not mentioned the Product make, I guess that it is a Kodak Printer as I have experience that this error comes on a Kodak Printer. In this case, try my steps given below:---------

• First open Device Manager.
• Select option " View" and from there select " Show hidden Devices ".
• After then select " Printers ".
• Then select "Action" and then "Uninstall".
• After the above, select "Action" and then "Scan for Hardware Changes".
• After doing the above all, select the Kodak AIO Home Center icon. If this time error also occurs, try to change the Administrator right to the Home Center application.
• For doing it, you need to right click the icon and select properties, then select Compatibility and then Un-check all the Boxes and Apply then and exit.
• Then again try to run the Kodak application.
• If the error comes on again then it is surely a Firmware or Software Problem. For it you need to unplug the Printer from the PC and ask Kodak support for any available upgraded Softwares of Firmware.
• At last be sure that only one Port is enabled in for the Printer. Disable all ports ( if there are multiple ports enabled ) except one and try again to run Kodak AIO Home Center.