Electrolux / Frigidaire Model FFSG5115PW0. E66 Code. Call a Electrolux repair company & they came out to replace a thermostat & limiter. Failed within a week. Came out again & replaced the thermostat & limiter again and said that the exhaust run was excessive. We remodeled the room by ripping out the wall, re-routing the water, gas & drain lines so the dryer now was adjacent to the exterior wall. Same problem & they refused to come out. I replaced the items as well as the main computer board & the door switch. Dryer will run but kicks out if more than a few items are in the dryer. Ready for the curb???
Hello, thank you for your question. We have researched your error code and found a relevant video which will answer your question. https://youtu.be/balkxnWFjr8
We hope this information helps.
Good morning, dissapointed81. I understand that you are experiencing some concerns with your dryer. Before contacting a service provider, I would suggest that you either unplug or turn the circuit breaker off to the unit for five to ten minutes. Let the dryer reset completely and try to use it as normal again. If this does not prove to be effective, we do recommend that a professional technician diagnose the thermal limiter and control board. The E66 error code typically indicates an error within the thermal limiter and interrupted communication to the control board. Though a full repair, and replacement parts, might not be needed we do recommend having a professional test the unit for safety reasons. -Hope this helps!
216 views
Usually answered in minutes!
×