You`ll find the error codes in the service manual, But I don`t think this will help you, it sounds like you have a compatability problem. Are you not better connecting your turntable up to your PC?? You can purchase these really cheaply out of ASDA and other good retailers now which will plug directly into the USB port. You`ll have no problems then, I promise, I`ve done it. Ian
Has it actually wrote to the disc and have you finalized the disc?? Does the disc look like it`s been wrote to, you can usually see the recorded section of the disc but if it`s not been finalized, It`ll never play on a normal CD player. A CD player requires the TOC (Table Of Contents) in the centre of the disc, if this is missing, the CD will just give up and say disc error or something similar. Ian
×
760 views
Usually answered in minutes!
I did connect the turntable to the PC. That's how I got the digital image of the vinyl record. I have done a little more looking and determined that there is something I'm overlooking in the SoundForge software. The error code on the TV is probably something akin to "there is nothing on the disk to play". The CD is still empty even though the SoundForge program looked like it was writing to the CD. The CD burner certainly looked like it was burning.
×