My PIXMA MX330 printer stopped operating and displayed printer error code 5800 Contact the Service Center. This error code is not shown in the recently downloaded manual for this printer.
This is an ink overuse error. It may read 5B00 and not 5800.
No real easy fix as far as I know but this video might help. Good luck! https://www.youtube.com/watch?v=0waX_GF-h7U
This video might help
Testimonial: "The procedure described in the You Tube video worked fine up to the point I should have received the LED screen directions to download two pages. My LED screen only contained "Service Mode" and "idle". I tried several times to obtain the download instructions screen, but it never appeared. Huby"
Did you download the service tool?
It is correct to show service mode and idle only on the screen.
Next instructions are to download the service tool from your computer. The link is in the video description. I put it here as well. Follow the instructions carefully with this software. http://www.mediafire.com/download/59x9rj...
×
Solutions to Fix Canon Printer Error Code 5800
Solution 1:- Replace the Waste Ink Absorber
Solution 2:- Enter Canon Printer In Service Mode
If the INVALID KEY message appears on your computer screen at the end of this procedure, then you should disconnect the power cable from the printer and connect it once more.
In this regard, our Canon Printer Support team has provided some possible causes and effective solutions to Canon Printer Error Code 5800. In order to eradicate the problem, you need to know the core of the issue first. Therefore, going through this article might help you understand and resolve your printing problem better.
680 views
Usually answered in minutes!
×