After upgrading my EOC-5610 wrongly(may be very stupidly) from version 1.2.4 to version 1.3.1 via web interface,I discovered that the version 1.3.1 was for EOC-5611P and not for my EOC-5610.Then I could not be able access web interface.Then I tried to re-flash it with the original firmware by using these tools(putty & tftp server).I did all the steps very carefully but the problem still that(cant load the file ..... operation timed out) in loading command. Please I want someone(professional one) who can help me. Thanks.
I think you're out of luck. If you had posted this info with the 5 other posts you made you would have gotten this answer sooner.
You have over-written the PROM on the AP with garbage.
You could contact Engenius and see if they will flash the PROM with a working image otherwise you have a piece of junk.
Testimonial: "With your answer this,now I should cry hardly specially that this piece could not be found in iraq now."
Sometimes people list these items in online auctions like ebay etc. The case or connectors could be damaged but the circuit board would be ok.
Are you sure it is junk now? what is the alternate solution? really may i contact engenius and they may replay me or consider that i am crazy?
You can't be the only one with this issue. It never hurts to try. The worst they can do is say no.
I had read user manual for EOC-5610 & EOC-5611P individually and saw them are same exactly,this may help me?
can u visit this url to please? http://www.engenius-europe.com/index.php...
take attention on the word "applies to EOC5611P (EOC5610)" what does that mean?
Time to stop the questions. The unit is bricked.
×
291 views
Usually answered in minutes!
Note: I am using windows 7 Ultimate N SP1
×