3 digit code for remote control for panasonic sa-pt570 dvd player
0028,0022,0027. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
SOURCE: Dish network remote to run RCA DVD player
I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online
SOURCE: i am trying to program
Hello this is Nick Franta from DISH. There are a couple of codes you can try. The following link will provide the available codes we have. You would need to hold the SAT button down until the top 4 buttons light up, enter the code, then #. The SAT button should flash 3 times when the code is successful.
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Let us know if you need further assistance!
SOURCE: Need remote code for panasonic DVD player
The codes for Panasonic on the 6.4 Remote are Panasonic 639 663 699 714 715 716 734 765 813 840 841 855 856 868
869 870 871 872 873 882
Let me know if you have any mnre questions. Thanks.
SOURCE: I have a "Dish" universal
Your post caught my attention, paulobrien1, as I found it interesting! Here are the codes for a Phillips DVD player: 925, 585, 554, 556, and 678. If you have any questions or issues with that, I encourage you to let me know so I can look into it a bit further for you!
Hope that helps!
Delivering video anywhere, anytime.
SOURCE: how do I set up a dish network remote control for a dvd?
Juan Prieto,
I would be happy to provide both of those requests for you. Below is a link where you can get codes for any equipment, and the steps are below that!
Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx
Addressing Remote to DVD:
1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 1 then enter the code and press the Pound (#) button. The AUX button should flash three times.
4.) Try functions (Power, etc..) and see if working.
If you have any other questions or need further assistance let me know here!
Tommy Faust
DISH Internet Response Team
5.) If no function, repeat steps 1-4 with another code.
202 views
Usually answered in minutes!
×