Microsoft Windows 98 for PC Problem is there any software driver for pen drive so that my win98 o.s. computer can detect any type or companies pen drive plz tell me

I have windows 2000 professional nt technology and my computer do not detect the pendrive.please solve this problem.
Jai

I want to convert an ntfs file system to fat16 file system

Error SU0013
Setup could not create files on your startup drive and cannot set up Windows. If you have HPFS or Windows NT file system, you must create an MS-DOS boot partition. If you have LANtastic server or SuperStor compression, disable it before running Setup. See SETUP.TXT on Setup Disk 1 or the Windows CD-ROM.

This error can also occur if you try to install the retail version of Windows 95 over an existing installation of OSR2 on a hard disk using the FAT32 file system.

This error message can also occur if you have a FAT32 partition and you are installing Windows 95 (retail version), which only expects FAT16. This error can also occur if you are running EZ Drive and you have the Floppy Boot Protection option enabled in EZ Drive. You should be able to resolve this error by disabling the Floppy Boot Protection option in EZ Drive.

The third-party product discussed in this article is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

HEY DEAR sunil

its 2007 man...just forget about window 98....

now use a new window man....do u know win 98 is so old & doesnot support all hardware......

so forget it....

i would like to suggest u win xp-sp-2 to use...

hear are some feature of win xp i would like to tell u man-

1.latest window...

2 supports to all old & new software& hardware..

3.have its own back up system...

4 most reliable & frequently used window///

4 have its own driver packlage........so no nead to install drivers for ...pen drive,mp-3 players,card reader.

5.better support to all ur hardwares...

so my dear friend forget win 98...and use-wimn xp....and give a new look to u r pc......

dont forget to tell me u r problem solved or not

best regards & best of luck..

even u can mail me at my mailing add- sigma_shiva1@yahoo.co.in

Make sure USB Port of ur  computer is working properly if it is working properly then install software from www.pendrive.com/downloads

Gizmo1

Wow, the 90's are a calling... sure their is a roumor of a usb pen driver for win 98' ....

Windows 98, especially in it's second edition (also known as Windows 98SE), handles USB fairly well, however there are no generic/universal mass storage device drivers preinstalled in the operating system, so you will need to install some additional drivers for it. Some manufacturers do however, provide the Windows 98 drivers on CD, others have them available to download, and others simply do not have them available at all!!!!!!!

generic Windows 98SE USB mass storage device drivers:

http://www.technical-assistance.co.uk/drivers/nusb31e.exe

instructions?? :

1. Download the exe file to the desktop
2. Remove ALL drivers for USB flash drives in Device Manager
3. Remove ALL drivers for any USB 2.0 controllers (many have an uninstall option)
4. Remove ALL unknown devices from Device Manager (*carefull)
5. Run the exe file you downloaded, and follow the instructions, rebooting after installation
6. When the computer boots up again, it may detect new USB 2.0 controllers, in which case you may need to reboot again

as always good luck! now im going to go back to my windows 95 and play Bioshock on full graphics!! excuse me = )