Code needed I have the Proteam Jumbo remote control and I need the code for Sharp TV GJ210

SOURCE: NEXXTECH 2 IN 1 BIG BUTTON Universal REMOTE CONTROL TV code for sansui tv

Have a solution for you.Turn your TV on then Press and hold 'P' on remote until light stays on. Press device to be controlled (TV/Cable) light will flicker but stay on. Now keep pressing channel up (up to 300 times) until device changes channel. Then press Enter to save code. Hope this helps

SOURCE: Living Solutions Jumbo Remote

for code retrieval:
press and hold "code search" until led lights up solid red.
press the device button (TV for tv, DVD for dvd player, etc.)
press each of the buttons 0-9 untill the light blinks. that means you have the 1st number of the 3 digit code.
repeat to find the 2nd and 3rd.
After you find the 3rd digit, the led will turn off.

Now you have the code!

So, what you do is:
turn on the device you want to program.
aim the remote and hold code search until light remains solid red
press device button
enter the code, led should turn off
after that, press the on/off key.

SOURCE: proteam jumbo universal remote

Turn your device on.
Hold down the set button and press the button of the device you want to program (e.g. TV) then release the set button.
Press the set button again and the red light will start flashing.
Press the power button repeatedly until the device switches off.
This is now the correct code.
Press the device button once more to set the code in to the memory.

Hope that helps.