At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a kenmore 80 series, top loader, 3spd motor, ultra rinse, heavy duty, super capacity plus, quiet pak
"The washer does not drain the water out after the wash cycle. It started a month ago not spinning the water out enough but now it simply doesn't do it at all. This is weird to me because I can put the washer on the regular wash cycle and it works. It won't release the water or spin out after the wash cycle. Any help you can give me I really appreciate. I'm stuck with a washer full of water."
Please help
I've determined that the lid switch is the problem. Can you tell me the best way to revmove the cover for the machine? I've pulled it forward to release it from the clip but the rear section is still holding strong.I've determined that the lid switch is the problem. Can you tell me the best way to revmove the cover for the machine? I've pulled it forward to release it from the clip but the rear section is still holding strong.
AnonymousDec 11, 2008
My washer will not drain. It goes through the cycles just fine but when it comes time to drain between cycles it just sits there! Any ideas?My washer will not drain. It goes through the cycles just fine but when it comes time to drain between cycles it just sits there! Any ideas?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
where is the lid switch on a top load kemore washer
I've determined that the lid switch is the problem. Can you tell me the best way to revmove the cover for the machine? I've pulled it forward to release it from the clip but the rear section is still holding strong.
My washer will not drain. It goes through the cycles just fine but when it comes time to drain between cycles it just sits there! Any ideas?
I live in the 55 plus and need an answer.
×