Due to the age of this radio, Uniden no longer has the manual for it. However, the manual for the BC60XLT-1 (link below) explains on page 13 how to enter a frequency into a channel.
http://www.uniden.com/pdf/BC60XLT-1om.pdf
The two radios are similar enough that the frequency entry instructions should work for your BC147XLT.
Also, you can find frequency information at:
http://www.radioreference.com
and then click on "database".
Programming your scanner
1. Press Manual 1 Manual
2. Enter a frequency
3. Press E
4. Press Manual
5. Repeat steps 2, 3 and 4 as needed
6. When you finish the programming steps press Scan
657 views
Usually answered in minutes!
×