I need to know how to put it in discovery mode
Start with your headset turned off. Press the talk button on the headset. Hold it until you see the light on the headset begin to rapidly blink red, blue, red, blue, red, blue, etc. Let go, the light should continue to blink red and blue. Go into your phones blue tooth menu and search for the headset. The phone will only find the headset if the headset is in pairing mode (blinking red and blue). The pass key is 0000.
Press and hold the answer button for 5 seconds. The light should flash red / blue
SOURCE: how to put the plantronics 510 in discovery mode
Power the device on by holding the block(sitting at hightest point when upright) button. A blue led should flash on outside of the mic. Then press and hold the + (Volume up)button and the Answer button(on side of mic) both at the same time until the blue light flashes intermitten red then blue
1,152 views
Usually answered in minutes!
×