Hi,
I have perfect volume when I attached cable line directly into my Akai TV. However, when I run the cable through my Comcast box then run A/V cables to my TV, my volume decreases significantly. I'm attaching red/green/blue video cables and white/red audio cables from comcast box into component 1 of my TV.
Thanks in advance for any help!
John
You might have to talk to comcast about that most signals are low for reasons of conservation of bandwidth, they may also be sending 5.1 which tends to be lower volume and adds surround in.
mono is always loud, and that is what you get with 75 ohm coaxial cable (single screw in ).
hope this helps.
411 views
Usually answered in minutes!
×