The System Event Log may become full of erroneous IPMI Events reported by the System
BIOS. When this occurs, the following message may appear during
Power-On Self-Test (POST) and POST cannot continue without user input:
02a2: BMC System Error Log (SEL) Full
Press F1 to Continue, Press F2 to Setup
If the above message appears during POST, perform the following steps to run BIOS setup and delete the System Event Log:
Enter into bios and Clear BMC log .
SOURCE: server error
Clear System Event Log thru CMOS setup or the management software provided with server . The SEL is full that is the reason the error message
3,086 views
Usually answered in minutes!
×