How do you clean pump on front loader washer? red light said to clean

SOURCE: Where is the pump/filter located on my Kenmore Front Loader Washe

It is just behind the lower panel. Remove the 3 screws from the lower panel (the panel just below the door), the screws are on the lip on the bottom of the panel facing the front of the machine. Pull down and toward you to get the panel off. The filter and clean out are in the center. Unscrew the cap to remove and clean out, but have lots of towels ready, there will be water coming out.

SOURCE: washing machine

bottom right corner behind the little door

SOURCE: Red light on - clean pump

remove bottom panel 3 screws7mm once removed access to pump im front clean and reinstall thats it

Michael Thomas

• 3056 Answers
• Posted on Dec 05, 2009

SOURCE: hi have a front loader

hello there again please dont forget to give the chat session a rating for me ok
Best regards Michael

Testimonial: "thanks it was helpful but i cant seem to detach the pump!"

SOURCE: How do i clean a filter of a whirlpool awm 5080 front loader

If you are talking about the drain pump strainer, you need to remove the lower front panel. should be 3 screws on the bottom facing forward. Once you have that off, the pump strainer is almost in the center, facing you. unscrew it counterclockwise to remove.