This machine is not proper work. Error code sc:302 . Functional problem . Turn main power switch off than on . If the error appears again.
Hi
This error indicates problems with the laser motor on your printer.
Have it replaced.
SOURCE: Error occured SC:302 Functional Problem Turn
SC:302
Charge roller current leak
Symptom: A current leak signal for the charge roller is detected.
Possible Cause:
?? Charge roller damaged
?? High voltage supply board defective
?? Poor connection of the PCU
SOURCE: I have a ricoh 2051
After turn the main switch off and on the error appears again????
This error means that there is a bad comunication between the controller board and the operation panel.
Did you intervew in the machine? Some tecnical intervewing?
854 views
Usually answered in minutes!
×