If an amp has no load, as in there are no speakers connected to it, then it will go into protection mode because it sees an infinite load. Be thankful that it has a protection mode, or it would be toasted!
SOURCE: wat kind of wire should i use
What does the fuse on the back say? AWG 4 has around a 60 amp capacity, AWG 2 is about 95 amps. I wouldn't suspect you would need larger than 2. Remember the higher the Gauge the more Resistance per foot you have which means more of a voltage drop at higher current.
SOURCE: I have an mmats pro audio car amplifier model
i believe your amp is 2ohm stable so be sure your speaker are wired for a 2ohm load or higher anything below 2ohm would throw the amp into protect
415 views
Usually answered in minutes!
×