Hi, what you want to do is just connect the speaker wires from the head unit straight across to the pre-amp inputs of the amp. If you have a sub, also connect the pre-amp outputs of the head unit to the 2 sub inputs of the amp. Connect the blue wire of the head unit to the turn-on terminal of the amp and connect power wires to both units. May I ask what speakers are you using?
Testimonial: "JTURCOTTE you're the best.Now am gettin to work on the installation.Thank you so much and will be back for more installation help."
OK, this will take me about 30 min. Please stand by.
Please see diagrams below and let me know if you have questions.
Note that an easy way to adapt the hear speaker wires to RCA connectors is to buy a pair of patch cable like the ones here:
http://www.google.com/products/catalog?q...
Cut these cables in half and you will have the 4 RCA jacks you need. Just make sure you connect the shield wire (connects to outer part of the RCA jack) to the black striped head wires. The solid colored speaker wires should connect to the center "signal" post of the RCA connector.
Thank you for the help.This really help big time.Thank you again.
The one picture was clipped on the right. The blue wire from the head unit goes to the "REM" terminal of the amp.
×
1,010 views
Usually answered in minutes!
Am using 4 Sony XS-GT1626A and a Audiobahn AW1251J 12" with the Pioneer DEH-1250 in dash and the 5 channel Jensen 5500 Power amp.Please help me with the diagram from the head unit to the amplifier.Here is my email address: cwilliam@mail.fm.Thank you.
Am using a DEH-1250 in dash player,a 5 Channel Jensen 5500 Amp,2 prs of Sony XS-GT1626A ,1 Audiobahn AW1251J subwoofer.Appreciate if you could draw me a diagram for wiring from the player to the amp.thank you.
×