Cartoni C20S Fluid Head 150mm Bowl Base - Answered Questions & Fixed issues
How do I turn it on?
Press the On button on the mystery object.
Google
'make model manual'.
..
2/16/2025 10:02:22 PM •
Photography
•
Answered
on Feb 16, 2025
•
333 views
I want to delete all pictures from my Phillips digital frame all at the same time. How can I do this?
Old Question!To delete all pictures you can go to General Settings and select Delete All. Steps Access the Menu on the frame.Scroll to Settings or General Settings.Press OK. Scroll to RESET.Use Right to access General Setting.Use Up or Down to access the Delete all menu.Use Left or Right to select Favorite or Internal.Press OK to confirm your setting and return to Setting menu.Press Exit to leave this menu and go back to the main menu.To delete all pictures, you can skip the photo selection step and press the MENU button directly and select DELETE ALL...
2/16/2025 10:00:46 PM •
Photography
•
Answered
on Feb 16, 2025
•
290 views
BELL AND HOWELL MODEL 456 QUESTIONS?
troubleshoot this problem! Here are some steps you can try:
Check the Film Feed Tire: The film feed tire is responsible for pulling the film through the projector. If it's not turning properly, it can cause slow or uneven film feed. Inspect the tire for any damage or wear. If needed, you can clean it or replace it. There's a helpful video on YouTube that demonstrates how to fix a Bell & Howell 8mm projector feed tire not turning.
Inspect the Film Path: Make sure the film is threaded correctly through the projector. Check that it's properly aligned with the sprockets and the film gate. Sometimes, misalignment can cause feeding issues.
Clean the Film Path: Dust, debris, or residue on the film path can hinder smooth film movement. Use a soft brush or compressed air to clean the film gate, sprockets, and other relevant parts.
Lubricate Moving Parts: Lubricate the relevant moving parts (such as the film gate, sprockets, and gears) with an appropriate projector oil. Be cautious not to over-lubricate, as excess oil can attract dust.
Check the Drive Belt: The drive belt may be worn out or loose. If you find any issues, consider replacing it. There's a forum post discussing a DIY solution for changing the drive belt on Bell & Howell projectors.
Inspect the Lens and Diffuser: While this may not directly affect film feed, a fogged lens or a damaged diffuser can impact overall performance. Cleaning the lens with rubbing alcohol and a lint-free cloth might help.
5/5/2024 5:31:54 PM •
Photography
•
Answered
on May 05, 2024
•
351 views
Film won't load on Vectis 300 MinoIta
The clue is in your descrition; Old.
If the mechanism has jammed, due to age or lack of use that causes tarnisg=hing on the contacts, the motor/mechanism will not load.
I would get it serviced at an aurgorised Minolta repair shop.
Contact Minolta for a list of authorised repairers.
3/22/2024 7:04:40 AM •
Photography
•
Answered
on Mar 22, 2024
•
68 views
I tried to use a 16GB PNYcard in my picture fram and it would not work. It said "No Card" on the screen. What's the answer?
If your picture frame is not recognizing the 16GB PNY card and displaying a "No Card" message, there could be several reasons for this issue:
- Compatibility: Some picture frames may have limitations on the size or type of memory card they can accept. Ensure that the picture frame is compatible with SDHC or SDXC cards, as these are the types commonly used for higher-capacity cards like 16GB.
- File System: Check if the memory card is formatted in a compatible file system such as FAT32 or exFAT. Some picture frames may not recognize cards formatted in other file systems. You may need to format the card using a compatible file system on your computer before using it in the picture frame.
- Card Reader Slot: Ensure that the memory card is inserted correctly into the card reader slot of the picture frame. Sometimes, improper insertion can prevent the device from detecting the card.
- Card Compatibility: While SDHC and SDXC cards are generally backward-compatible with devices that support SD cards, some older picture frames may have limited compatibility with higher-capacity SD cards. Try using a lower-capacity SD card (e.g., 2GB or 4GB) to see if the picture frame recognizes it.
- Faulty Card or Picture Frame: If none of the above solutions work, there may be an issue with either the memory card or the picture frame itself. Try using the memory card in a different device to check if it's functioning correctly. Similarly, try using a different memory card in the picture frame to see if it's able to recognize it. If the problem persists, there may be a hardware issue with either the card or the picture frame, and you may need to contact the manufacturer for assistance or consider replacing the faulty component.
By following these troubleshooting steps, you should be able to determine the cause of the issue and resolve it accordingly.
3/16/2024 9:30:07 AM •
Photography
•
Answered
on Mar 16, 2024
•
403 views
Need OptiPix Pro software
I own the OptiPix DPF and here is a pic of the owners manual with directions for the OptPixsetup file.
11/25/2023 1:11:02 AM •
Photography
•
Answered
on Nov 25, 2023
•
2,202 views
Sony DPF-d72n digital photo frame will not switch
Solved!
My Sony DPF-D72N frame is a few years old. Today I unplugged it (fool!) and plugged it back in. The screen would flash on and off to black. Power button light would turn on and off. After plugging and unplugging it a few times, it would not turn on at all.
I tested the power supply, and it showed 5V. I was about to throw the frame away, but on a whim, I tested a 2nd power supply. It worked!
So even though the power supply looked like it was working, it was only without a load on it.
Replace your power supply!
I happened to have a spare 5V 2A power supply, so I just chopped the end of the dead power supply and soldered it onto the new one.
And we all lived happily ever after.
12/19/2022 2:06:56 PM •
Photography
•
Answered
on Dec 19, 2022
•
1,420 views
Not finding what you are looking for?
