Creative Labs MuVo Mix MP3 Player - Page 5 - Answered Questions & Fixed issues
Sound blaster live 5.1 sound driver code sb0100
Hi curt here I have a hppaviliona636n desk top runing vista and I have the on board sound disabled. as it dose not seam o work and i do not have the orignal disk wth the drivers on it . how everI put my sound blaster live 5.1 sb0100 pci card in and down loaded the drivers for this card and installed them tem form a file on the desk top how ever this also did not make this card fireand I wonder if maybe I am missing a jumper of the sound blaster board and cant seam to find ajunper lay out for tiswhat cn I do to check for jumpers on both the sound blasterboard and the hp mother board .? and also do the drivers have to be saved on a cd or a 1.44 flopie disk befor they will load or will the sound drivers load from the desk top location?? my email address if you need it is
nasacolumbia@aol.com thank you Curt. tucson
The pin of my headset bend and now it works only
This is not easy to fix as the connector is usually molded plastic. If you have access to a soldering iron of low wattage (25W) and a small tip you might be able to replace the complete cord all the way to the headphones. This type of job is not quick and wires have to be disconnected at the earpiece. Sorry.
Earphone problem
Check the audio balance on whatever device you are using your headphones with. There may be nothing wrong with the headphones. If thats not it than replacing them is the only thing you can do.
No sound coming from speakers
better search for the driver for the hardware you install for sound there are different drive as you mention that you have win XP so search for the driver accrording to the operating system you are using see for both hardware as well software issue for more problem do consult you nearest autorised service centre for help or do visit the microsoft web site for more help so untill then see you sir hope you will find the solution for your problem
I cant hear any sound from my computer.i tried to
hello..try this way to install the driver.click right My Computer,Properties,Hardware and Device Manager click.then click the yellow Question mark near at the Sound,video and games controller then install and update the Driver..Thanks and Good Luck...^_^
My mp3 zen neon2 doesn't switch on. it has frozen.
Your Zen needs a refresher course in Zen.
You will find your drivers on the creative site
As part of our ongoing efforts to supportyou, Creative is happy to introduce the MP3 Player Recovery Tool, aprogram that resolves the majority of player problems quickly.
One click is all it takes to update yourplayer to the latest available firmware, and to give your player aclean bill of health.
BEFORE YOU START
- Check that the MP3 Player Recovery Tool supports your player.
- Ensure that you are using Windows XP® Service Pack 232-bit,Windows XP Professional x64 Edition or Windows Vista™ (32-bit or64-bitversion).
- Back up the contents of your player, if possible,as recoveringyour player may require it to be re-formatted, erasing allcontent.
- Make sure your player battery is at least 50% charged.
- Detailed usage instructions are available in our Knowledge Base.
Click here if you require further information/assistance.
Sound card problem
Hi Miong u,
Untill you install the sound drivers, your computer won`t recognise your sound card.
Go HERE (http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=828&OSFullName=Windows*+2000&lang=eng&strOSs=19&submit=Go%21) and download, and install your audio drivers.
You can download the driver from intel website depending on the O.S
Might I also suggest you download your chipset drivers as well.
Thanks for using Fixya.
Do rate the solution as "Fixya" if 100% satisfied.
IN MY SYSTEM UNFORTUNATELY UNINSTALLED THE DRIVER
You can try this:
I am assuming you have a PC based sound system.
1. Remove your Creative Labs Home Theater from your PC. You should remove all hardware.
2. If you have Windows, go to "Control Panel"
3. Select "Add or Remove Programs"
4. Delete all Software releted to your Creative Labs System
5. Go to
http://www.creative.com/language.asp?sDestUrl=/support/downloads
6. Download the appropriate driver for your system
7. Reinstall the system with the new driver
You could try your CD ROM after completely deleting the software from your PC, but I think I'd just try the downloaded version. The important thing is to completely remove all hardware and software before reinstalling.
My digital player is not being recognized
You don't have enough room on your drive to do this. I had the same problem. I took all my router ports off and connected just my creative vision player only and it worked. Computer system was over loaded.
I want software
I RECOMEND TO USE A SOUNDBLASTER CARD IF YOU WANT A BEST SOUND FOR IT
I am looking for the
Call Creative to see if they replace that component, or buy a broken/damaged one off eBay or some other site and rip that component from the dead unit.
No software cd
Get the software from Creative's website - use Windows Media Player to transfer songs
Sync Manager
it is working on it. try reebooting and trying again.
Not finding what you are looking for?
