Kenmore 82722 Electric Portable Dryer - Answered Questions & Fixed issues

0helpful
1answer

Dryer does not get real
Sounds like one of the heating coils has broken. Replacement usually requires complete dismantlement of the unit to get at the back of the barrel.
Read full answer
3/4/2011 1:29:20 AM • Kenmore 82722... • Answered on Mar 04, 2011 • 115 views
0helpful
1answer

Is there a portable dryer that runs without
A tumble dryer needs no venting but requires dumping water out:
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Read full answer
1/28/2011 1:16:45 AM • Kenmore 82722... • Answered on Jan 28, 2011 • 104 views
0helpful
1answer

Engine sounds like it is going and it still
You may be able to get a few more days out of t buy lubing the motor. Here's How If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Read full answer
1/13/2011 4:31:21 PM • Kenmore 82722... • Answered on Jan 13, 2011 • 57 views
0helpful
1answer

The dryer make a "chih ...chih... chih...." noise
Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964
Read full answer
10/28/2010 4:03:17 AM • Kenmore 82722... • Answered on Oct 28, 2010 • 68 views
0helpful
1answer

I need a new washer that will fasten to my kenmore
I don't understand your question Do you want to stack these units?.
Read full answer
3/20/2010 4:09:57 AM • Kenmore 82722... • Answered on Mar 20, 2010 • 150 views
0helpful
1answer

Kenmore 120V portable dryer only gets lukewarm
Sometimes the venting in the dryer needs ton be cleaned out as it plugs up and the high limit thermostat makes it short cycle on the heat cycle.
Read full answer
3/20/2010 4:13:41 AM • Kenmore 82722... • Answered on Mar 20, 2010 • 280 views
0helpful
2answers

Dryer makes noise and smells like it is burning
Check the idler. Sounds like it froze up?
Read full answer
7/29/2009 6:49:17 AM • Kenmore 82722... • Answered on Jul 29, 2009 • 315 views
0helpful
1answer

Dryer to hot and smoking
Get a dryer vent cleaner and stick it in as far as it will go. You have a plug somehwere in the vent and it needs to be cleared, try doing this from the top down to avoid making the clog worse
Read full answer
2/8/2009 5:49:23 PM • Kenmore 82722... • Answered on Feb 08, 2009 • 194 views
0helpful
1answer

Kenmore Portable dryer, shocking
To me it sounds like you could have the polarity reversed on the wiring. Also is the outlet that it is plugged in to grounded that alone will cause a shock to be given off, Have goods holiday, biigg53566+
Read full answer
12/1/2008 10:56:07 PM • Kenmore 82722... • Answered on Dec 01, 2008 • 405 views
0helpful
1answer

Thermal overload?
The windings in the motor have been overheated to the point that the insulation is burnt off. I call this pre installed smoke. If it is let out replace the motor. There should be a local appliance parts dealer that can help you get the motor.
Read full answer
3/26/2008 5:18:57 PM • Kenmore 82722... • Answered on Mar 26, 2008 • 170 views
0helpful
1answer

Kenmore 110 60712990 not shutting off
If you mean Not Switching off at the end of a cycle; check the timer unit for a short circuit Relay/Thyristor.
Read full answer
7/23/2025 6:46:47 AM • Kenmore Dryers • Answered on Jul 23, 2025 • 11 views
0helpful
2answers

Kenmore Electric Dryer. It runs okay for a couple minutes, then stops with E1 F3 flashing. How to fix please?
Question edited for clarity, add CAPS, add magic word.Question moved from Misc to maker category.The temperature thermistor sensor has failed.https://www.google.com/search?q=Kenmore+Electric+Dryer+Error+E1+F3..
Read full answer
2/10/2025 12:58:53 PM • Kenmore Dryers • Answered on Feb 10, 2025 • 23 views
0helpful
1answer

Kenmore 80 series Dryer. Where and how does the pulley go and belt run on a 80 series Kenmore dryer Make and model Kenmore 80 Series replacing belt and pulley came loose.
Question edited for clarity. It is very simple, the belt goes around the motor pulley and then behind the idler pulley with the spring tension holding it tight, then it goes around the drum. The videos should help. ..
Read full answer
10/8/2024 6:04:00 PM • Kenmore Dryers • Answered on Oct 08, 2024 • 20 views
0helpful
1answer

Kenmore Elite Smartheat quietpak9 HE4 dryer. How do I fix Kenmore dryer intermittent problem?
Question edited for clarity. Intermittent problems are the most difficult faults to diagnose because of their nature. Everything you state leads me to believe it is a button problem, or a main board problem, but the fact it works perfectly sometimes mean it is not the electronics board itself. They tend to work, or they don't, so it is likely a connection problem, due to heat, cold and vibration. Get a can of Electrical Switch Cleaner, (not WD40). Remove the panel and flood the buttons with switch cleaner. I see there are 4 multipin connectors on the wiring harness. break these connections and spray the with cleaner. Make and break a couple of times to clean the contacts. Take pictures before removing the connectors as two look similar. Unfortunately, the control board is no longer available in any of the colours at Sears, so I hope this cleaning works for you. Another thing you can check for is a board track crack or a dry joint. Use a jewelers loupe to magnify. https://www.searspartsdirect.com/model/5cf25nkh29-000583/kenmore-elite-11085088400-dryer-parts ..
Read full answer
7/31/2024 7:01:08 PM • Kenmore Dryers • Answered on Jul 31, 2024 • 29 views
0helpful
1answer

Kenmore elite dryer starts and within 1-3 seconds beeps 3 times and stops
Probable heating element has failed or is overheating.
Read full answer
7/7/2024 7:19:36 AM • Kenmore Dryers • Answered on Jul 07, 2024 • 25 views
0helpful
2answers

Kenmore Steam Dryer 796.8158. What does the drum light look like, and where is it installed in a KENMORE 796.8158?
Question edited for clarity. https://www.google.com/search?q=Kenmore+Steam+Dryer+796.8158+replacement+light+bulb ..
Read full answer
5/17/2024 3:25:25 AM • Kenmore Dryers • Answered on May 17, 2024 • 29 views
0helpful
1answer

How to take front bottom panel off a Kenmore dryer series 600
To remove the front bottom panel of your Kenmore dryer series 600 and access the lint line for cleaning, follow these steps: Unplug the Dryer: Safety first! Make sure the dryer is unplugged from the power outlet. Remove the Toe Panel: Locate the screws at the base of the toe panel (the lower front panel). Unscrew these screws to release the toe panel. Lift the toe panel down and away from the dryer to remove it. Set it aside. Access the Front Panel: Remove the two screws along the top of the front panel. Lift the front panel off the Kenmore HE2 dryer cabinet. Clean the Lint Line: With the front panel removed, you'll have access to the lint line area. Vacuum or clean out any lint, dust, and debris from this area. A lint brush or a vacuum cleaner with a narrow attachment can be helpful. Reassemble: Once you've cleaned the lint line, reattach the front panel by reversing the steps above.
Read full answer
5/6/2024 8:10:08 PM • Kenmore Dryers • Answered on May 06, 2024 • 62 views
0helpful
2answers

Drum spins off center and clothes get stuck between drum and casing
If your clothes get marked or torn in your dryer, check these:

Rollers
Rear seal
Front glides
Front seal
Rollers Your dryer may use rollers, or wheels, to support the rear of the clothes drum. When these are worn out, they may cause the clothes drum to drop down slightly, which can pinch the clothes between the top of the clothes drum and the rear of the dryer interior. When the rollers wear out, you need to replace the whole set.

Rear seal Your dryer may have a felt-like seal at the rear of the drum. If this seal is worn, torn, or missing, clothes can get caught and torn in the space between the clothes drum and the rear of the dryer interior. When the rear seal wears out, you need to replace it.

Front glides Your dryer probably uses nylon or plastic glides at the front of the clothes drum for support. When these are worn out, they may cause the clothes drum to drop down slightly, which can pinch the clothes between the top of the clothes drum and the front of the dryer interior. When the glides wear out, you need to replace them as a set.

Front seal Many dryers have a felt-like seal at the front of the drum. If this seal is worn, torn, or missing, the clothes in the dryer may get caught and torn in the space between the clothes drum and the front of the dryer interior. When the seal wears out, you need to replace it.
Read full answer
4/23/2024 11:52:33 AM • Kenmore Dryers • Answered on Apr 23, 2024 • 914 views
0helpful
2answers

Trying to find out how much part #7 on the exploded view of the Kenmore elite electric dryer model 110.2808 is? It is a motor.
110.2808 is an incomplete model number. Motors are typically $140 to $180 USD https://www.easyapplianceparts.ca/PartInfo.aspx?inventory=334304&SourceCode=18 This is is a typical Kenmore model designation and is probably the matching washer to your dryer. Yours is missing 4 numbers. Label in the back, label on the door frame, mentioned on the manual.

Model # 11028081700 Official Kenmore Elite washer

 https://www.google.com/search?q=Kenmore+elite+electric+dryer+110.2808 ..
Read full answer
2/23/2024 6:44:28 PM • Kenmore Dryers • Answered on Feb 23, 2024 • 33 views
0helpful
1answer

Is it possible to reverse the direction that the door opens on Kenmore Elite Quietpak 4?
Yes, it looks like you can. Don't forget though that you have to get inside and move the door switch. https://www.google.com/search?q=Kenmore+Elite+Quietpak+4+reverse+door ..
Read full answer
1/26/2024 12:16:00 AM • Kenmore Dryers • Answered on Jan 26, 2024 • 48 views
Not finding what you are looking for?
Kenmore 82722 Electric Portable Dryer Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Kenmore 63942 Dryer
Kenmore 63942 Dryer

1,329 Questions

Kenmore Elite HE4 Electric Dryer
Kenmore Elite HE4 Electric Dryer

1,410 Questions

Kenmore 62602 Electric Dryer
Kenmore 62602 Electric Dryer

750 Questions

Kenmore 73952 Gas Dryer
Kenmore 73952 Gas Dryer

524 Questions

Kenmore 62802 Electric Dryer
Kenmore 62802 Electric Dryer

182 Questions

Top Kenmore Dryers Experts

Brad Brown

Level 3 Expert

19190 Answers

jdthefixer

Level 3 Expert

748 Answers

Kolbrun...

Level 3 Expert

1229 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...