20 Most Recent Comet Pump s - 8102.2403.13 - *HANDLE PIN, 2-5/8", w/RING - Page 8 Questions & Answers

0helpful
1answer

Does this Mac 10-10 chain saw have points and condenser

Some do some don't depending upon whether it has been upgraded to electronic ignition. Have a look here; https://www.youtube.com/watch?v=FKceGl1_ZMY
5/4/2024 6:23:49 AM • Garden • Answered on May 04, 2024
0helpful
1answer

Why does my fuel drip pass my shut off valve on my lawn mower when it is off

Probably a worn seal. Replacing the fuel tap is usually the cheapest and most convenient option.
5/4/2024 6:21:15 AM • Garden • Answered on May 04, 2024
0helpful
1answer

Do you know where I can purchase the saw drive assembly for a Model JDF-4ET 18 20V Pruning Saw

Finding specific parts for older or less common models of tools can sometimes be a challenge, but there are a few avenues you can explore:
  1. Manufacturer's Website: Start by checking the manufacturer's website for spare parts or replacement parts. Some manufacturers have online stores where you can purchase individual parts for their products.
  2. Online Marketplaces: Websites like eBay, Amazon, or specialized tool parts websites might have listings for the saw drive assembly you're looking for. It's worth searching using the model number of your pruning saw to see if anyone is selling the part you need.
  3. Local Hardware Stores or Garden Centers: Some local hardware stores or garden centers may carry replacement parts for pruning saws. It's worth calling around to see if any nearby stores have the part you need in stock.
  4. Specialized Tool Repair Shops: There are shops that specialize in repairing and servicing power tools and gardening equipment. They may have access to a wider range of spare parts and could potentially order the saw drive assembly for you.
  5. Online Forums or Communities: Sometimes, fellow hobbyists or professionals in online forums or communities related to gardening or power tools might have spare parts or know where to find them. Consider asking for recommendations in these forums.
  6. Contact the Manufacturer Directly: If you're having trouble finding the part you need, consider reaching out to the manufacturer directly. They may be able to point you in the right direction or provide assistance in obtaining the saw drive assembly.
Remember to have the model number and any other relevant information about your pruning saw handy when searching for the replacement part, as it will help ensure you get the right one.
5/4/2024 6:19:52 AM • Garden • Answered on May 04, 2024
0helpful
1answer

Greatland Outdoors Screened Gazebo. The one I have, I think is 12' x 10' square with no instructions. How do I set it up please?

Question edited for clarity. They all work the same way. Make the top pented area. Put the cover on. Add one Section of leg to each corner and then the final leg pieces. Add the side screens. This link contains all the information on Greatland Gazebos. They all have names rather than sizes. https://www.google.com/search?q=greatland+outdoors+screened+gazebo+instructions ..
5/3/2024 4:06:15 AM • Garden • Answered on May 03, 2024
0helpful
2answers

Is weed membrane fabric any good for applying to stone driveway

Ensure the membrane is protected with sand before laying the stone to avoid piercing the membrane.
5/2/2024 7:55:24 PM • Garden • Answered on May 02, 2024
0helpful
1answer

New Holland TC30 tractor. I need help finding a video on how to change the fan belt on it please. Help!

Question edited for clarity and toss in some CAPS. Not a good idea for your user name to be your email address. This site has 11 million viewers a year and 10,000 are looking for email address and phone numbers to harvest, spam and/or sell. All in the link https://www.google.com/search?q=new+holland+tc30+tractor+replace+fan+belt ..
5/1/2024 11:54:24 PM • Garden • Answered on May 01, 2024
0helpful
1answer

Valve adjustment for model 44p777

Hello,If not adjusted while at TDC (Top Dead Center) on the compression stroke it could affect the compression,to double check remove the plug and valve cover.Rotate engine,ex valve down and up then intake and when piston comes up to top and before starting down check lash there. Valve clearance is.004-.006 on both valves valve lash
4/29/2024 5:38:25 PM • Garden • Answered on Apr 29, 2024
0helpful
5answers

What are the most romantic flowers?

There are various kinds of romantic flowers are available at online like Iris, wild flowers, lilac, carnations, orchid, lily, tulips, daisy, red rose, sunflowers and many more. Each of these flowers has It's own importance related to various kinds of occasion. You can buy any of these flowers at https://moysesroses.co.uk/
4/29/2024 5:34:16 AM • Garden • Answered on Apr 29, 2024
0helpful
1answer

Wiring diagram for cub cade rztl 54 17crcaca009

https://www.ccpartsnmore.com/cub-cadet-wiring-schematics

Scroll down to RTZ section.
4/29/2024 12:48:23 AM • Garden • Answered on Apr 29, 2024
0helpful
4answers

Where is the oil adjustment

Hi,

Most Stihl saw have the adjustment screw on the bottom of the saw. The ones I've seen have an E mark which the factory setting. Turn the screw clockwise to increase the oil and counterclockwise to decrease it.

Hope this helps. If it does, I'd appreciate a 4 thumbs up. Thanks,

Handie Andie
4/28/2024 10:19:09 AM • Garden • Answered on Apr 28, 2024
0helpful
1answer

I've a 5 litre garden pressure sprayer and it's not functioning properly. It is pumping pressure but then it's leaking it all out at top of the green handle.

Here are some steps you can follow: Check the Seals and O-Rings: Release the pressure: Make sure there's no pressure in the cylinder by releasing the pressure release valve. Unscrew the pump: Remove the pump to access the internal components. Inspect the seals and O-rings: Look for any damaged or worn-out rubber seals. Check the rubber seal at the bottom of the tube (where the plunger sits) and ensure it's in place. Examine the one-way valve (usually at the bottom of the tube) and clean it. Lubricate it with silicone grease. Lubricate the rubber washer on the plunger with silicone grease and reassemble it in the tube. Reassemble the pump: Put the plunger back into the tube and lock it with the handle. Test the sprayer: Pump it up and check if it maintains pressure without leaking. Inspect the Handle and Hose: Handle connection: Ensure the handle is securely attached to the cylinder. Hose inspection: Check the hose for kinks, twists, or blockages. Straighten out any kinks and remove debris that might be blocking the hose. Check the Nozzle and Wand: Nozzle adjustment: Adjust the nozzle to the desired spray pattern. Wand inspection: Examine the spray wand for clogs or obstructions. Lubricate O-Rings and Seals: Apply silicone grease to the O-rings, seals, and other moving parts to ensure smooth operation. Test the Sprayer: Fill the cylinder to the desired level (avoid exceeding the maximum fill mark). Screw down the pump firmly to create an airtight seal. Manually operate the pressure release valve to ensure it's working.
4/27/2024 12:03:00 AM • Garden • Answered on Apr 27, 2024
0helpful
1answer

Case 1294 operational manual

Unfortunately, Tractor Manuals from the big players are never free. There is a Service Manual in the first link, but you only get a flash of it. When you put 'Case 1294' into that site search, it still only gives a flash of it. https://www.google.com/search?q=Case+1294+manual ..
4/26/2024 12:05:41 AM • Garden • Answered on Apr 26, 2024
0helpful
1answer

Weed trimmer (2 wheeled) screeches.

All questions need full 'make model (what is is)' as first 3 words please. Very often, issues like this are a known fault and users tell the fix. You need to track down where the screech is coming from? Wheels Drive Belt Bearings Piston rings Or it may be battery operated? ..
4/24/2024 10:27:50 PM • Garden • Answered on Apr 24, 2024
0helpful
1answer

Parts diagram for wall kennel pro model 8800

It looks like you meant 'Wahl', this is why upper case letters are important for 'proper names' because Spell check won't alter them. Here are the parts diagram and suppliers, including Wahl themselves. https://www.google.com/search?q=wahl+kennel+pro+model+8800+parts+diagram You can safely ignore the answer from the African Prince as he is just copying and pasting from AI Chat GPT4. ..
4/23/2024 9:17:53 PM • Garden • Answered on Apr 23, 2024
0helpful
2answers

What are the top advantages of online flower delivery services?

As a customer, the advantage is that I don't have to drive to the florist. Saves time and gas. I could make a phone call, but then I wouldn't see the available flowers.
4/23/2024 10:14:23 AM • Garden • Answered on Apr 23, 2024
0helpful
1answer

What is the transportation ring on a huskvarna chain saw

The transportation ring on a Husqvarna chainsaw is a small metal ring that is sometimes fitted onto one of the bolts when the saw is new. Its purpose is to prevent the chain from rotating during transportation or storage. If your chainsaw has this ring, you should remove it before using the saw. Keep it in a safe place so you can use it again if needed. If you're looking for more information about Husqvarna chainsaws, you can refer to the operator's manual for detailed instructions. https://www.manualslib.com/manual/3145215/Husqvarna-440.html
4/20/2024 9:45:09 PM • Garden • Answered on Apr 20, 2024
0helpful
1answer

HPB18 3.6Ah 18Volt Replacement for Black and Decker 18V Battery can this stay on the charging unit in between use?

Yes, you can leave it on the charger. Modern chargers are designed to handle this, and it won’t harm the battery. However, it’s a good practice to remove the battery once it’s fully charged to prevent overcharging, especially if you won’t be using the tool for an extended period.
Remember to follow the manufacturer’s guidelines for optimal battery care, and enjoy the enhanced performance of your Black and Decker tools!
4/19/2024 6:17:32 PM • Garden • Answered on Apr 19, 2024
0helpful
1answer

What are some broadleaf evergreen weeping trees?

TreeKisan is a AI- based Platform where tree farmers can know the standing tree market valuation in just 1 minute and sell to potential buyers. Easily assess the economic potential of your trees and make informed decisions. Download TreeKisan Now!
4/17/2024 9:39:10 AM • Garden • Answered on Apr 17, 2024
0helpful
1answer

How do I found out the valve clearance for a 14.5 I/C OHV. Model 280H07?

Link : https://heavy-equipmentmanual.com/
4/9/2024 7:22:44 AM • Garden • Answered on Apr 09, 2024
Not finding what you are looking for?
Comet Pump s - 8102.2403.13 - *HANDLE PIN, 2-5/8", w/RING Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Comet Pump Garden Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

john h

Level 3 Expert

29497 Answers

CJ Rock
CJ Rock

Level 3 Expert

4553 Answers

Are you a Comet Pump Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Comet Pump Garden

  • Comet Pump Garden

Most Popular Question

much compression senix 4ql 26 5cc 4

  • Garden
Loading...