Questions & Answers for: loading paper problems - Page 2

noticed the photo paper was slightly curled, so I flattened it out and that solved my problem. Also, if you are loading multiple sheets at one time, try just loading one sheet and see if that fixes it

Paper won't load. and Stops printing before it can start. The printer starts normally. Loads. Even begins the printing process. I can hear the little motors and stuff working. But as soon as moment ...

...Try removing paper, turning machine off and on and re-inserting paper. Remember to fan (separate) paper before loading, it could be static causing the sheets to stick together and jam in the

...loading paper "paper set again" error message appear in wepro HQ-2600 printer.I replace paper tractor and clean all the censor but problem remain.How can I resolve this problem Cheng 8 pin cable. For ...

paper loading error i keep getting (paper setting error load roll paper)coming up even though paper is correctly loaded hi the sloution to the problem is that to go ahead and try to reset the printer ...

...can't get it to load try adjusting the load tray, if you still can't get it to lad go to www.hp.com enter your model and select loading paper problem and it will run a self diagnostic test of

Printer Canon LBP3300, When was printer it show "Load custom paper in manual feed slot". Have try to slot manual feed but also cant work. Please help to solve this problem. thanks Go to ...

...paper well before loading it. Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams. Also to clear paper jam if you have the ...

...loading the paper this indication does not change. We have to switch Off-then ON the machine. In service mode we have checked the working of this sensor. it shows paper initially, after removing the ...

...paper not loading The paper is not curled or creased. The paper is not too old. See the instructions that came with the paper for more information. The number of sheets in the paper stack does not ...