Questions & Answers for: humidity level - Page 6

...humidity level set for 65% and the unit is set to go on and off every three hours. The humidity in the room now reads 58-60%. The humidifier still turns on. Even though it is set to 65% and the room ...

...humidity level stays at 50% all the time. i have another humidity level readout; and, it says the room is at 27.6%. anyone have solutions. There is a sticker that comes in the owner's manual that ...

...need to adjust your knob level to cooler, or decrease your temperature desired adjsutment to 73 degrees or lower than that. high humidity in your area can only be resolve if you adjust your room ...

level of humidity (example: 40%). Is the unit suppose to shut off completely? I believe the dehumidifier part shuts off one it reaches the programmed level. But the fan doesn't shut off. Depending

set higher than the humidity level in the house. Lower the level to 32 to 35%. Also, remove and check the air intake filter for dirt or clogs. Clean if necessary. Hope this helps you solve the problem

What do the control knob numbers mean. Does the lower the number mean less humidity? If you have an analog unit the humidity extraction knob should be turned to Maximum. If you have an LED screen, the

but still shows temp and humidity? I may have reached the humidity level that you have set it at. Press the HUMIDITY button until it says "Lo". That should put you into continuous run mode. Good Luck

...humidity level? , this cool mist tower is ideal for medium rooms. It provides a refreshingly cool, invisible mist, as well as a digital humidistat which offers precise humidity control for your ...

...humidity level, and get it to turn off when full. if its a newly mfg unit then yes the fans gonna run all the time , that's done to increase efficiency , if you hold down on arrows then you should be ...

...to work so check that the a humidity of the room area has a readable humidity level for it to work if the humidity is over 50% and it is not working then maybe the ac part is not working ...