Questions & Answers for: fork alignment - Page 9

...ball joint to ball joint, the place for the wrench is to adjust wheel alignment toe in. Ball joints are removed with a special fork, you can sometimes use a hammer to shock the taper and remove

dt 175 having trouble selecting neutral. It seems to be up around 4th gear Neutral should be between 1st and 2nd. Likely cause could be worn or bent shift forks and/or shhift drum. Both are inside the

...FORK LOCK UNIT ON A HARLEY DAVERSON 2003 FX ? You don't want to. It takes a special tool to keep the lock in proper alignment. You can get the lock out but then you won't be able to get it back in. ...

...weight shift....were the bike wants to go right if handle bars are let loose... make sure that the forks have prper oil/pressure ...

i have an 03 flstc and the triple tree seems as if it is not straight . a couple of other bike that i've seen also have this problem. mainly flstc Hi Leon39667, for more information about your ...

...to drive down to get re aligned. the ball joints are simple, just be sure to use a deep pickle fork and tap them apart, dont beat on it to

fork bend. What could be the problem. wheel cud be bad or the balancing is off--inspect shocks also do a alignment for the front tire and also take it back to the showroom . Some times they might be a

...hours, but you will need a "pickle fork" tool for the ball joints (if you need to drop the lower A arm), and a few other specialized tools, as well as a front alignment after the replacement is

Alignment**: Make sure the key is inserted fully and aligned correctly in the ignition switch. Sometimes, keys can get stuck or not align properly, preventing them from turning. 3. **Locked Handlebar*

Fork to the lower arm and torque the bolt to 88 ft. lbs. (120 Nm) Upper strut mounting nuts and torque to 36 ft. lbs. (50 Nm) Brake hose bracket Front wheel Check and/or adjust the wheel alignment. --